Looking for reliable water heater troubleshooting tips in Tucson, AZ? Curtis Plumbing is here to help! Before you call our professional plumbing team at 520-323-7697, try these steps to troubleshoot your water heater issues.

  • For gas water heaters, start by checking the pilot light. If it’s out, follow the manufacturer’s instructions to relight it. If the pilot light won’t stay lit, it may be a sign of a faulty thermocouple or gas valve, and you should call Curtis Plumbing for help.
  • If you have an electric water heater, check the circuit breaker to make sure it hasn’t tripped. If it has, reset it and see if the heater comes back on. If it trips again, it may indicate a wiring problem or a faulty thermostat, which should be inspected by our qualified technicians.
  • If you’re experiencing a drop in water temperature, check the thermostat to ensure it hasn’t been accidentally turned down. Adjust it to your desired temperature if needed.
  • Sediment buildup in the tank can also cause water heaters to work harder than necessary, reducing their efficiency. To address this issue, drain the tank and flush it out to remove any sediment buildup.

If none of these tips help resolve the issue, don’t hesitate to call in the professionals at Curtis Plumbing. Our skilled technicians will diagnose and repair your water heater problems safely and efficiently. Contact us at 520-323-7697 for all your plumbing needs in Tucson, AZ.

Before You Fix Your Water Heater

Before attempting to repair your water heater, it’s crucial to prioritize safety and prevent further damage.

Check the Warranty

One of the first things to consider is the warranty of your appliance. Look for the rating plate on the tank and take note of the model and serial number. If you suspect that your water heater is malfunctioning, such as experiencing a limited hot water supply, contact Curtis Plumbing to inquire about the warranty. This information will help you determine if the tank has a warranty that covers replacement parts or a new tank.

Turn Off the Power

Before beginning any work on your water heater, it’s essential to turn off the power to the heater’s circuit by switching off the appropriate breaker in your home’s service panel. If you’re in Tucson, AZ, and need assistance, call Curtis Plumbing at 520-323-7697. Electric water heaters are high-voltage appliances, and working with them when the power is on can be dangerous. Additionally, use a non-contact voltage tester to ensure the power is off before handling any wires.

Prepare the Water Heater for Repair

Once you’ve turned off the power and confirmed that it’s off, you can proceed with preparing the water heater for repair. Curtis Plumbing offers water heater repair services in Tucson, AZ. Drain the tank entirely to prevent water from spilling when you remove the heating element or thermostat. You can do this by connecting a hose to the drain valve at the bottom of the tank and allowing the water to flow into a drain or bucket.

Before removing the heating element or thermostat, clean the area around them with a wire brush to remove any buildup or debris. This will make it easier to access the parts and reduce the risk of contamination. With these preparations complete, Curtis Plumbing’s qualified technicians are ready to start troubleshooting your water heater and repairing any issues that you find. Call Curtis Plumbing

Troubleshooting inadequate hot water

If you’re experiencing inadequate hot water, it can be a frustrating problem, but there are several steps you can take to fix it before calling in a professional.

Check the Hot Water Demand

If your water heater is producing hot water, but not enough of it, it may be too small to meet your household’s hot water demand. The first thing to do is to check the demand to ensure it doesn’t exceed the capacity of the water heater. The water heater should have 75% of its capacity as hot water. For example, a 40-gallon water heater is suitable for a demand of 30 gallons.

Reduce Hot Water Demand

If the demand is too great for the heater’s capacity, there are a few things you can do to reduce the demand for hot water. One option is to limit the length of showers, as they’re a common source of high hot water demand. Installing low-flow showerheads can also help reduce the demand for hot water while still providing a satisfying shower experience. Additionally, you can try spreading out dishwashing and laundry to different times of the day instead of doing them simultaneously.

Identify and Fix Heater Issues

If your water heater is not undersized and suddenly produces less hot water than it used to, one or both of its heating elements may have failed and need replacement. A constant supply of lukewarm water during a shower is indicative of a defective upper heating element. On the other hand, hot water that runs out quickly during a shower is indicative of a defective lower heating element.

Professional Assistance for Water Heater Repairs

If you’re not confident in repairing your water heater, it’s best to seek professional assistance from a trusted plumber. Before attempting any repairs, make sure to turn off the circuit’s power by switching off the appropriate breaker in your home’s service panel, and test all wires with a non-contact voltage tester to ensure the power is off before touching them. Contact Curtis Plumbing at 520-323-7697, a reliable plumbing company located in Tucson, AZ, to diagnose and fix the issue. Their skilled professionals can quickly identify and repair any water heater problems, ensuring your system operates efficiently and reliably.

Curtis Plumbing Services

In conclusion, if you’re experiencing issues with your hot water, it’s important to take the necessary steps to identify and resolve the problem. While some solutions can be done on your own, it’s crucial to turn to a professional if you’re unsure or uncomfortable with making any repairs. That’s where Curtis Plumbing comes in. Located in Tucson, AZ, Curtis Plumbing has been serving the community with top-quality plumbing services for years. Their team of skilled and experienced professionals is equipped to handle any plumbing issue, big or small. Whether you need a simple repair or a complete installation, Curtis Plumbing is just a phone call away at 520-323-7697. Trust them to get your hot water flowing again and keep your home running smoothly. Contact Curtis Plumbing today for all your plumbing needs.